It could be a good idea to construct a garden wall out of fieldstone to give the garden beds in your yard a more finished appearance. A low fieldstone wall looks rough and natural, which allows it to mix in well with a range of other landscaping Fieldstone Garden Walls projects surrounding your house.
Dry-laid fieldstone walls may be constructed without the need of a contractor, mortar, or concrete. This picture guide will show you how simple it is to construct a retaining wall in the design you have chosen. Creating boundaries for gardens is easily accomplished by stacking fieldstones in the form of a low wall. At the same time, the garden wall slate contributes both an aesthetic and practical component to the space. Here is the guide on building a stone wall for the garden.
Table of Contents
How to Construct a Garden Wall Using Fieldstone
Be choosy in your selection of fieldstone walls to purchase. Pretend that you are a contractor and inquire about the item located in the middle of the pallet. The following are the steps on how to build a fieldstone wall.
Supplies needed:
- A load of fieldstone walls on a pallet; the quantity required will be determined by the length and height of the wall you want to construct.
- Shovel
- Hammer and chisel
- Pea gravel and a bubble level are optional additions.
How to Construct a Stone Wall Out of Fieldstone Around a Garden
Stones should be moved to the garden area.
Bring all of the stones to the location where you want the fieldstone wall to be, and arrange them so that you can see the variety of sizes and forms.
Create a trench.
Create a ditch around the bed. You want it to be broad enough so that two stones may fit side by side, and you want the depth to be around four to six inches stone garden wall. It is necessary to carry out these steps to guarantee the wall’s durability.
It is important to note that while constructing this kind of dry-laid fieldstone wall if you want your wall to be higher, you will need to dig your trench deeper to ensure that the wall has a sturdy and stable base.
Add pea gravel
Cover the bottom of the trench with a layer of pea gravel or tiny stones that are one inch deep and smooth it down with the back of a shovel to flat in the building fieldstone wall. If the grade of the trench is sloped, you may level the inside of the trench by filling the lower parts with more tiny stone or crushed stone to produce a level surface on which to begin stacking the stones. This can be done even if the grade of the trench is not level while building a Fieldstone Garden Walls.
Add Stones
When constructing the wall, begin at the bottom with the biggest stones possible. The stones in the images are covered in the dirt since the slate garden wall had just unearthed them to use in reconstructing the wall.
Include Yet Another Row of Stones Here.
As you create each layer, look for stones that may be used interchangeably in several layers. A hammer and chisel will do the trick to achieve the size you want. All to do is just had to carry out this action a few times on the flagstone garden wall.
Keep adding more and more layers.
Finish each layer before adding the next one; doing so will assist in maintaining the wall’s level. You may use a bubble level to examine whether or not the wall is level if you want to be certain about fieldstone walls.
Include the Capstones.
As soon as you have achieved the desired wall height, choose the most attractive and level stones for the wall’s capstone. If you are not going to create a wall that is a complete circle and will have open ends in your wall, you have two options: you may either butt the ends of the stones right up against a building or sidewalk, or you can step-stone them so that they terminate in the grass.
All settled
That sums it up well. Done! It is not nearly as challenging as it sounds, and since mortar or other specialized equipment is not required, the only expense is the purchase of the stones and pea gravel itself to build a stone garden wall.
Final thought
The majority of fieldstone walls are sold on wooden pallets, which may be purchased from a nearby stone yard or at a business that specializes in home repair. Being of a smaller size, these fieldstones are suitable for constructing smaller walls without the need for mortar. There are two types of fieldstone wall pallets: flat fieldstone pallets and fieldstone pallets of various sizes. It is better to opt for smooth flat stones. Because they are more consistent in both size and height, it will be much simpler for you to put them together as you construct your wall.
